Double Towel Racks – The Easy Way To Increase Space

Bathrooms almost always pose a storage challenge. They often have minimal space to do all the jobs we need to do in there and to store everything we use while we're in there.

When a bathroom is shared by a couple of people, or even an entire family, unique storage challenges come up, and they require unique solutions. When, say, four people use the same room for bathing, an obvious problem is: where do you put all the towels? Bathroom hardware manufacturers came up with a better solution: double towel racks.

A traditional single towel rack provides sufficient space to dry one towel. If you've got four people using four towels each day, and you have a typical bathroom, you'll need a wall covered with towel rods to provide enough drying space.

Double towel racks provide an innovation solution to this all-too-common bathroom storage problem. You'll find double towel racks come in traditional finishes like polished chrome and polished and antique brass, and popular finishes like brushed nickel and oil-rubbed bronze. You can find economic versions of double towel racks in unfinished wood and ceramic-and-plastic. Regardless of the amount the wall space you have available to install this hardware, you'll find one to fit your space; They come in the range of standard sizes.

If your bathroom is short on storage, you'll usually be open to considering any new space-saving solutions. You can find bathroom suites with a double towel racks installed below. Imagine-in the space where you could normally dry a towel or two, you can double your hanging space, and have room to store a few fresh folded towels and other bathroom essentials, too.

Double towel racks are an excellent solution when you've got lots of damp towels to handle, but other solutions do exist:

• Install a row of pegs or hooks along the wall of the bathroom.
• Install one or more multi-prong hooks on the back of the bathroom door.
• Buy a shower curtain rod with a towel rack incorporated in its design.
• When you purchase shower doors, look for ones where the handles double as towel bars.
• Install suction-cup hooks inside the tub surround.
• Place a swing-arm towel bar to the wall next to your tub or shower. This way, the towel bars extend into the room; They are not limited to hanging against a wall.
• Hang a hook over the bathroom door, linen closet door, or the door of the water closet. These over-door hooks come in single, double, and multiple hook versions in colors and finishes that either stand out or blend in.
• Repurpose an old-style coat rack and use it to hang towels in the bathroom. It takes up only a single square foot of precious floor space.
• If you want to add furniture to your bathroom, look for a hall tree, which is usually reserved for use in the foyer or a mudroom. They come in many styles and finishes, equipped with hooks, mirrors, storage benches, and shelves.
• If you've fortified enough to have a sizable linen closet in your bathroom, visit the closet organization section of your home improvement store. These stores have trained personnel who can help you look at the space you have and redesign it to suit your needs.

Installing a couple of double towel racks can provide a simple way to add storage space to your bathroom. But investigate all the possible storage options for your unique bathroom design challenges. You're not limited to one solution-think creatively and combine them to make a bathroom that works for you.

Posted in general | Comments Off on Double Towel Racks – The Easy Way To Increase Space

How to Watch Satellite TV Online Without Any Satellite Dish

Anyone can watch satellite TV online without any satellite dish system nowdays. In case you do not know, this article would show you one time-tested and another new revolutionary way to watch satellite TV on the internet without having to set up a satellite dish.

Many of the older generation grew up in an era of satellite dishes, especially for those who live in the rural areas where cable do not exist. The dishes are transmitters and together with receivers are conduits for TV signals to be displayed as visual images and pictures on our TV screens. However, they are not always pleasant. Set up can be tough and definitely not for those who are not good with their hands or have poor technical skills. Satellite dishes have grown smaller in recent years but they used to be larger than 6 foot monsters in earlier days. If that irks you, you would be relieved to know that you can watch satellite TV online just like many others without satellite dish system.

What are the hardware and PC requirements you need to set up your 'satellite-dish less' PC satellite online TV?

1. A Good PCTV Card

A PCTV card can be installed onto your computer to make your computer work like a satellite television set. Such cards come in the form of internal or external hardware. If you are familiar with the inside of a computer, then an internal card could be a good choice since they tend to be cheaper and more affordable. However, do not bother yourself when you find it too troublesome to fix it internally because there are external cards that work more like plug-and-play gadgets. They cost more and can set you back easily by a few hundreds. As long as your PC has a spare USB port, this option to watch satellite TV online is open to you.

2. PC Requirements

I would suggest you check your systems configuration before you start shopping for a PCTV card. Most cards require a minimum Pentium 3 333MHz system to run well but remember to note down the specifications like RAM, hard disk space, Operating System, etc before you head to the stores.

3. Ready Internet Connection

PCTV cards work well with both dial-up and broadband connections. However, I have a word of advice here. Dial-up transmission runs like a snail and is a really serious party spoiler. You can end up more frustrated than glad that you are watching the program. Go for broadband connection if you can afford to.

Okay, now that we have discussed about the older commonly accepted method to watch satellite TV online, we will look at another new revolutionary technique. This requires the usage of PC satellite TV software which can be downloaded easily. The setup is simple and all it takes is downloading the software and clicking a few buttons before you are ready to watch satellite TV online from more than 3000 channels. Awesome is not it?

For more information on this PC satellite TV software, do a read up at my satellite TV blog.

This article may be freely reprinted or distributed in its entity in any ezine, newsletter, blog or website. The author's name, bio and website links must remain intact and be included with every reproduction.

Posted in general | Comments Off on How to Watch Satellite TV Online Without Any Satellite Dish

Computer Viruses Problems and Solutions

We all are now aware with the term Computer Viruses

Let’s understand this simple definition: Computer Viruses can be considered as small software application which tends to take control over computer operation. The computer virus may delete contents from the hard disk and even take a ride on e-mail programs to become pandemic. Computer viruses be in various formats like in form of images, audio or video files. They may spread while downloading files from the Internet. Sometimes they may be purchased along with the pirated software too.

Let’s concentrate on symptoms of Viruses

There can be difficulty in accessing any disk or drive. The system might be running slow. Sometimes it may freeze. You may see distorted menus and dialog boxes. Any program may disappear on its own without any action. Sometimes you may see some new icons on the desktop. Application will not be running smooth. You may get error of any system file missing. Your windows may restart automatically sometimes. If you see this kind of symptoms on your system, then install any latest version of anti virus which you think compatible with the Operating System you have. Scan your system for the Computer Viruses. Even in severe condition you may need to format your system completely.

Let’s see what we can do to remove a Virus

You need to apply a Computer Viruses removal tools for the purpose. Sometimes you may find specific problems which are associated with some unwanted software programs which carries Computer Viruses You may get those viruses again in your system after uninstalling those programs. So you should be very much smart while choosing for the Tools for Computer Viruses removal.

To remove virus, follow these steps

1. Visit the Microsoft website to get latest updates from Microsoft Updates.

2. Perform regular scanning of your system with any updated Anti- Virus.

3. Download, install, and then run the Microsoft Malicious Software Removal Tool to remove Computer Viruses the system.

Preventive measure for Computer Virus

Its highly recommended you to keep your Operating systems updated. If you are not online don’t forget to check for Windows updates frequently. This is important because the Virus creator always tries to make use of any void in your Operating System to install their software Computer Viruses. If you are online user then make sure that your web browser is also an updated one. Try to use the most compatible and latest of the Web browser may be from any one like IE, Firefox, Opera or anyone else, because the Virus writer always tries to find mistakes in your browser.

Posted in general | Comments Off on Computer Viruses Problems and Solutions

Turn Your Basement Into a Virtual Shooting Gallery

An indoor shooting simulator is easy to add on to most projection based home theater systems, and in most cases is an inexpensive way to add hours of entertainment for the whole family. People of all ages enjoy playing the wide range of games that are available for the system, everything from “Baseball Challenge” to “Elephant Hunter” will keep your family and friends entertained. Utilizing a shooting simulator is not only a great way to add excitement to your home theater room; it is also a get way to keep your shooting skills sharp.

System Basics:

There are a few basic requirements for adding a shooting simulator to an existing home theater. The simulator runs on a normal Windows based computer, software is compatible with Windows XP, Windows Vista and Windows 7. The image is broadcast through a projector to a screen, which most projectors and home theater screens will be suitable for use with this simulator. Now all you need to add is a basic simulator package, which includes a rifle, case, camera and five games. Installation of the simulator will only take about thirty minutes to setup and install the new software and hardware. Now you are ready to start enjoying the very best of simulated shooting. To recap the items you need: computer, projector, screen and a simulator package.

Benefits of Indoor Shooting:

There are many advantages to adding an indoor shooting simulator to you home theater room, these are just a few.

Convenience- having the ability to practice your shooting skills from within your own house, cuts down on drive time to the range and you can fire up your system anytime you want.

Cost Savings- ammunition is expensive! You will save a lot of money practicing your skills using a true to life replica laser firearm verses using live ammo.

Safety- using a laser firearm is a much safer weapon to practice will and it’s a lot better for your hearing.

Shooting Variety- with a shooting simulator you have the ability to practice your skills on a wide range of software titles. You can practice shooting skeet and with just a touch of a button you can switch over to another game and practice your marksmanship on simulated popup targets.

Entertainment- Gather you friends and family, challenge them for the highest score or for bragging rights.

Packages and Software:

With this system, there are many packages of both hardware and software available. Looking for a portable package or maybe a complete package if you don’t have a projector, computer and screen? Those packages and more are available. There are over 35 software titles currently available, which can be purchased separately or in 15 game packages. Software titles are being added, so you will always have the option to buy the latest games on the market. Do you have the best Halloween party on your block? There is a Halloween software package that will insure your party is unforgettable. Do you have a young hunter or marksman that could benefit from “Hunter’s Education” software? It is an option on this simulator. Teach them everything from ethical shooting to animal anatomy, with the hunter’s Ed package. Looking to hone your archery skills? This simulator has packages available for you bow enthusiasts. There are several optional firearms which can be added to the system, to maximize the skill development and enjoyment of the simulator.

Adding a shooting simulator to your theater room is easy and a cost effective way of increasing the entertainment value of your room as well as improve shooting skills. If you would like some more information on the shooting simulators or have any questions please contact me through the website.

Posted in general | Comments Off on Turn Your Basement Into a Virtual Shooting Gallery

Five Reasons to Study Forensic Accounting

Forensic accounting is the practice of utilizing accounting auditing and investigative skills to assist in legal matters to obtain an accurate result to establish the accountability for administrative proceeding. You may be wondering, why study forensic accounting?

Well, here are the five reasons:

  • Our current economic crisis has left many companies to face serious financial issues that may lead to bankruptcy. Hence, these companies have been forced to stoop down to the lowest level to save their company by committing frauds and swindles. This makes such a job an important one that increases in demand each year.
  • Internal audit in the company could not throw light on the different fact and other hidden aspects of the corporate fraud. They are hardly in a position to initiate proper action at proper time due to their lack of forensic accounting skills.
  • Forensic accounting is a new and very exciting study. This change the perspective of the world on accounting study, which has been a theoretically dull field in itself.
  • If you are ambitious, fast, observant, creative and diligent, Forensic accounting is definitely a dream job and a great investment. Using computer technology, creative thinking, and careful inspection of financial records; the hidden proof of the crimes can be discovered.
  • You will always be equipped with the latest computer software and gadgets. Forensic accounting heavily relies on computer software and generalized audit software to aid in the detection and investigation of fraud and white-collar crimes. Also, investigative tools such as data mining, link analysis software and case management software and the use of the Internet are the essential skills as well.

In conclusion, forensic accounting has been stereotyped as a boring and uninteresting job which has been proved to be wrong. There are many reasons which show to be benefits when it comes to studying forensic accounting. Not only will you be rewarded with a stable job, you would also look forward to going to work everyday

Posted in general | Comments Off on Five Reasons to Study Forensic Accounting

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

Visualwize Chess Training Software: A Review

Chess enthusiasts of all levels are always seeking ways to improve their chess skills, so that they can win at chess games, whether they play professionally or socially.

One of the most effective ways to improve your chess skills is to use a chess visualization software, which enables you to practice and improve your visualization skills. Visualization is one of the most important skills you need to succeed in chess.

A program that is apparently gaining a lot of popularity and is helping many people to improve their chess is Visualwize Chess Training Software.

Let’s address the basic questions on this software.

What is it?

Visualwize is a chess training software that trains your ability to have a clear mental picture of chess moves before you make these moves on the board. This enables you to assess the implications of your moves before you make the actual moves. This therefore enables you to play better at chess, as you will be able to make the right decisions and avoid making some mistakes that would make you lost a game.

This program has 240 visualization training exercises which are designed to develop your visualization skills. It has and more than 1200 moves to visualize. These moves are real moves made by a master player in real chess games. With the software, you can train to visualize up to 8 moves ahead.

The program consists of 4 levels, level 1 being rather easy and level 4 being hard. You can order the level that suits your needs. For those who really want to significantly improve their skills, level 4, the complete program, is recommended.

How does it work – what does the program actually do?

In simple terms, the program shows a chess position from a game between two chess masters, and then, with arrows, it shows the next few moves that have been made in that position by the renowned chess masters. The arrows stop in a position where a tactic, i.e., a combination that wins the game exists.

Unlike other programs and books that use written annotations for the moves, this program uses arrows on the board. This means it reflects a realistic playing scenario, and you don’t have to take your attention and eyes from the board to read written annotations.

This is one major factor that separates this program from others that are available on the Internet today. Rather than building up the skill of moving your eyes between notation and the board, Visualwize trains you in the art of seeing unfolding moves without actually affecting the board.

On the website where the program is offered, there are many informative and short videos that you can watch, which describe how the program works.

Why is it important – what benefits can you get from this program?

It is recommended that chess players wanting to take their chess to the next level use this program because it offers several benefits:

  • You will be able to see more chess moves ahead, before you actually make any move on the board, giving you an opportunity to assess the consequences of every move before you make it.
  • You will avoid making mistakes which can make you lose a game in an instant.
  • You will make the most of your training time since you will be able to easily visualize the notation below chess diagrams.
  • You become an efficient and effective chess player – you won’t need to calculate variations several times over because you will be able to clearly the consequences of your move in your mind, saving you a lot of time.
  • You will make a wise investment that will help you significantly improve your chess – the program is favourably priced at only $30. If you were to hire a chess coach, you would pay a very high fee per hour of the coach’s time to train you.
  • It is convenient – once you purchase the program, you can train at any time of the day or night, as much as you want.

With several books and programs on how to improve chess, available today, Visualwize is considered to be a cut above the rest among many chess enthusiasts.

Posted in general | Comments Off on Visualwize Chess Training Software: A Review

Medical Coding History – From Paper to Medial Coding Software

If we define medical coding as the assignment of alphanumerical characters to diagnoses, diseases, and treatments, then medical coding has been traced back to the 1600s in England with the London Bills of Mortality. A more standardized system of coding was developed for classifying death at the tail end of the 19th century. In 1893, Jacque Bertillon, a statistician, created the Bertillon Classification of Causes of Death, a system which was eventually adopted by 26 countries at the beginning of the 20th century. Shortly after the Bertillon Classification system was implemented, people began discussing the possibility of expanding the system beyond mortality as a way of tracking diseases.

By the middle of the 20th century, the World Health Organization (WHO) adopted a goal of a single global classification system for disease and mortality, entitled the International Classification of Diseases, Injuries, and Causes of Death (ICD). This classification system is updated every 10 years. The latest revision, ICD-10, is scheduled for adoption in the United States in 2013.

What started out as a small set of medical codes has evolved into a complex system that was initially standardized by the American Medical Association back in 1966 with current procedure codes (CPT) codes that are updated annually.

In the late 1970s, the Healthcare Common Procedure Coding System (HCPCS) was developed based on CPT. HCPCS has three levels of codes: Level One is the original CPT system. Level Two codes are alphanumeric and include non-physician services such as ambulances and other transportation as well as patient devices such as prosthetic devices. Level Three codes were developed as local codes, and were discontinued in 2003 in order to keep all codes relevant worldwide.

Recently, medical coding systems have been expanded to include other medical specialties. For example, there are coding systems related to disabilities, the dental field, prescription drugs, and mental health.

As the coding systems have become more complex and diverse, the need for training of medical coders has grown exponentially. Private training schools and public colleges throughout the country have developed certification programs. In order to be awarded a certificate, students must obtain a two-year degree from an accredited medical coding school and pass an exam given by the AHIMA.

Over the past 20 years, many coding processes have shifted from a paper-based system to a computer-based system using medical coding software and medical billing software. Many companies sell complete medical software-based coding solutions and myriad of products for specific medical disciplines, such as products that are specifically tailored to skilled nursing facilities, physicians, hospitals, surgery, cardiology, and more.

As medical facilities and professionals begin preparing for the conversion to ICD-10 in 2013, the need for more sophisticated medical coding software solutions and qualified medical coders will continue to grow.

CPT is a registered trademark of the American Medical Association.

Posted in general | Comments Off on Medical Coding History – From Paper to Medial Coding Software

Why Do We Need Software Engineering?

To understand the necessity for software engineering, we must pause briefly to look back at the recent history of computing. This history will help us to understand the problems that started to become obvious in the late sixties and early seventies, and the solutions that have led to the creation of the field of software engineering. These problems were referred to by some as “The software Crisis,” so named for the symptoms of the problem. The situation might also been called “The Complexity Barrier,” so named for the primary cause of the problems. Some refer to the software crisis in the past tense. The crisis is far from over, but thanks to the development of many new techniques that are now included under the title of software engineering, we have made and are continuing to make progress.

In the early days of computing the primary concern was with building or acquiring the hardware. Software was almost expected to take care of itself. The consensus held that “hardware” is “hard” to change, while “software” is “soft,” or easy to change. According, most people in the industry carefully planned hardware development but gave considerably less forethought to the software. If the software didn’t work, they believed, it would be easy enough to change it until it did work. In that case, why make the effort to plan?

The cost of software amounted to such a small fraction of the cost of the hardware that no one considered it very important to manage its development. Everyone, however, saw the importance of producing programs that were efficient and ran fast because this saved time on the expensive hardware. People time was assumed to save machine time. Making the people process efficient received little priority.

This approach proved satisfactory in the early days of computing, when the software was simple. However, as computing matured, programs became more complex and projects grew larger whereas programs had since been routinely specified, written, operated, and maintained all by the same person, programs began to be developed by teams of programmers to meet someone else’s expectations.

Individual effort gave way to team effort. Communication and coordination which once went on within the head of one person had to occur between the heads of many persons, making the whole process very much more complicated. As a result, communication, management, planning and documentation became critical.

Consider this analogy: a carpenter might work alone to build a simple house for himself or herself without more than a general concept of a plan. He or she could work things out or make adjustments as the work progressed. That’s how early programs were written. But if the home is more elaborate, or if it is built for someone else, the carpenter has to plan more carefully how the house is to be built. Plans need to be reviewed with the future owner before construction starts. And if the house is to be built by many carpenters, the whole project certainly has to be planned before work starts so that as one carpenter builds one part of the house, another is not building the other side of a different house. Scheduling becomes a key element so that cement contractors pour the basement walls before the carpenters start the framing. As the house becomes more complex and more people’s work has to be coordinated, blueprints and management plans are required.

As programs became more complex, the early methods used to make blueprints (flowcharts) were no longer satisfactory to represent this greater complexity. And thus it became difficult for one person who needed a program written to convey to another person, the programmer, just what was wanted, or for programmers to convey to each other what they were doing. In fact, without better methods of representation it became difficult for even one programmer to keep track of what he or she is doing.

The times required to write programs and their costs began to exceed to all estimates. It was not unusual for systems to cost more than twice what had been estimated and to take weeks, months or years longer than expected to complete. The systems turned over to the client frequently did not work correctly because the money or time had run out before the programs could be made to work as originally intended. Or the program was so complex that every attempt to fix a problem produced more problems than it fixed. As clients finally saw what they were getting, they often changed their minds about what they wanted. At least one very large military software systems project costing several hundred million dollars was abandoned because it could never be made to work properly.

The quality of programs also became a big concern. As computers and their programs were used for more vital tasks, like monitoring life support equipment, program quality took on new meaning. Since we had increased our dependency on computers and in many cases could no longer get along without them, we discovered how important it is that they work correctly.

Making a change within a complex program turned out to be very expensive. Often even to get the program to do something slightly different was so hard that it was easier to throw out the old program and start over. This, of course, was costly. Part of the evolution in the software engineering approach was learning to develop systems that are built well enough the first time so that simple changes can be made easily.

At the same time, hardware was growing ever less expensive. Tubes were replaced by transistors and transistors were replaced by integrated circuits until micro computers costing less than three thousand dollars have become several million dollars. As an indication of how fast change was occurring, the cost of a given amount of computing decreases by one half every two years. Given this realignment, the times and costs to develop the software were no longer so small, compared to the hardware, that they could be ignored.

As the cost of hardware plummeted, software continued to be written by humans, whose wages were rising. The savings from productivity improvements in software development from the use of assemblers, compilers, and data base management systems did not proceed as rapidly as the savings in hardware costs. Indeed, today software costs not only can no longer be ignored, they have become larger than the hardware costs. Some current developments, such as nonprocedural (fourth generation) languages and the use of artificial intelligence (fifth generation), show promise of increasing software development productivity, but we are only beginning to see their potential.

Another problem was that in the past programs were often before it was fully understood what the program needed to do. Once the program had been written, the client began to express dissatisfaction. And if the client is dissatisfied, ultimately the producer, too, was unhappy. As time went by software developers learned to lay out with paper and pencil exactly what they intended to do before starting. Then they could review the plans with the client to see if they met the client’s expectations. It is simpler and less expensive to make changes to this paper-and-pencil version than to make them after the system has been built. Using good planning makes it less likely that changes will have to be made once the program is finished.

Unfortunately, until several years ago no good method of representation existed to describe satisfactorily systems as complex as those that are being developed today. The only good representation of what the product will look like was the finished product itself. Developers could not show clients what they were planning. And clients could not see whether what the software was what they wanted until it was finally built. Then it was too expensive to change.

Again, consider the analogy of building construction. An architect can draw a floor plan. The client can usually gain some understanding of what the architect has planned and give feed back as to whether it is appropriate. Floor plans are reasonably easy for the layperson to understand because most people are familiar with the drawings representing geometrical objects. The architect and the client share common concepts about space and geometry. But the software engineer must represent for the client a system involving logic and information processing. Since they do not already have a language of common concepts, the software engineer must teach a new language to the client before they can communicate.

Moreover, it is important that this language be simple so it can be learned quickly.

Posted in general | Comments Off on Why Do We Need Software Engineering?

What Requirements Does a Dot Net Developer Need to Fulfill?

Microsoft Dot Net is a useful software development component. It provides tools and libraries to the software developers so that they can create Windows-based applications in a more efficient manner. A Dot Net developer is a software programmer who has specific skills using .Net to develop software and computer applications. For people who are in the midst of looking for developers for your projects, there are some areas you need to take note. You are advised to look for competent programmers who can really assist you to complete your tasks successfully.

First thing first, you need to be clear about the responsibilities of a .Net Developer before you start looking for suitable candidate. Seriously speaking, the programmer is required to:

• Work hand in hand with other software engineers and architects to develop a logical series of instructions referred to as programming code for the computer to communicate with the networks, applications and databases.

• Create new software applications to suit the business needs

• Modify, repair, test and enhance existing applications

After knowing what the developer is required to do, the next area we need to take into consideration is the academic qualification. In general, a programmer should have degree qualification in computer science, information technology or any related discipline. If the programmer is not a degree holder, you may take a look at his or her working experience. If the candidate has extensive experience dealing with .Net development tools, you can consider getting him or her in. Check with the candidate whether he or she is familiar with maintenance of ASP Applications, e-Commerce solution, online education and learning, social networking sites, corporate web applications, and so on.

At the same time, a good dot net developer must be competent in carrying out all the important tasks. It is a must for him or her to have the following skills in:

• Classic ASP

• Microsoft SQL 2000 / 2005

• MS Access

• JavaScript, XML, DHTML, AJAX and CSS

• VBScript and JScript

Frankly speaking, if the programmer does not have the above mentioned skills, most of the employers in the job market are not willing to hire him or her.

Besides the skills, we should also take serious consideration on the general qualities of the programmers. They should have qualities as follow:

• Good passion in work

Having great interest in work is important. The programmers should love and enjoy what they are doing.

• Good learning attitude

Learning is a continuous process. We can’t stop at certain stage. Good developers must have positive attitude in learning. They must always grab the opportunities to learn new technology so that good applications can be adapted.

• Some “intelligence”

Honestly speaking, intelligence is something very subjective. What I mean here is the “personality” of the person. Being a programmer, he or she must be smart and sensitive to respond to all changes. It is important for a programmer to be open-minded and willing to take new challenges from time to time.

Posted in general | Comments Off on What Requirements Does a Dot Net Developer Need to Fulfill?